PCB Fabrication UK

One of the few UK printed circuit board manufacturers
to provide a complete electronic manufacturing service

PCB Fabrication UK

Are you looking for PCB Fabrication UK? Then look no further than Creek View Electronics.

From bare PCB manufacturer to electronic assembly and component procurement, we make sure that your actual design requirements and specifications are met.

Our clients can take advantage of our comprehensive variety of design offerings for different styles of a printed circuit board, including; single-sided PCBs, double-sided traditional PCBs, plated through-hollow PCBs and multilayer PCBs.

With over 48 years’ revel in PCB fabrication, we have used our expertise to always refine our tactics. And meticulous management of our whole manufacturing gadgets ensures that only one tooling rate can be applied. This ensures our customer's tremendous merchandise at competitive prices.

We can provide fast 24-hour lead times on small-batch productions, or for very massive scale productions, we have worldwide manufacturing partners that can be utilised.

The speed at which we supply your merchandise is constantly primarily based upon your necessities and also you are assured to receive the same super standards on every product. Quality trying out is performed at our UK headquarters, with strict standards which ought to be met.

Creek View Electronics has visited its international providers to make certain that methods are worked inside globally recognised work ethics, without compromising on quality.

So, if you are looking for PCB Fabrication UK, look no further than Creek View Electronics, give us a call today to speak to one of our friendly members of staff or visit us on Facebook.


PCB Fabrication

Creekview Electronics is one of the few UK printed circuit board manufacturers to provide a complete electronic manufacturing service. From bare PCB manufacture to electronic assembly and component procurement, we ensure that your exact design requirements and specifications are met.

Our customers can take advantage of our comprehensive range of design services for different types of printed circuit board, including; single sided PCBs, double sided conventional PCBs, plated through-hole PCBs and multilayer PCBs.

With over 48-years’ experience in PCB fabrication, we have used our expertise to continually refine our processes. And meticulous management of our entire manufacturing system ensures that only one tooling charge will be applied. This guarantees our customers high quality products at competitive prices.

We can offer rapid 24-hour lead times on small batch productions, or for very large scale productions, we have international manufacturing partners that can be utilised.

The speed at which we deliver your products is always based upon your requirements and you are guaranteed to receive the same high quality standards on every product. Quality testing is carried out at our UK headquarters, with strict standards which must be met.

Creek View Electronics has visited its international suppliers to ensure that processes are worked within globally recognised work ethics, without compromising on quality.


PCB SPECIFICATION

• Maximum active PCB size: 900 mm x 900 mm

• Materials: High Tg Fr4, Standard Tg Fr4 & Rogers, Polyimide, PTFE

• Solder resists: Liquid photo-imageable, colours: green, red, blue, black, white, silver grey

• Legend inks: all colours including white standard and yellow

• Multi-layer: layer counts from 1 to 12 layers

• PCB thicknesses from 0.2mm to 3.2 mm

• Copper weights: 1/2 oz to 3 oz, 17.5µm to 105µm

• PCB finishes: - Hot air solder level both lead-free and leaded: immersion silver or immersion gold over electroless nickel

• Min track and gap: 0.1 mm on 1/2 oz copper start, 0.15 mm on 1 oz copper start, 0.2 mm on 2 oz copper start

• Smallest drill at size: 0.2mm Smallest recommended drill size: 0.3mm

• Minimum solder resist to copper clearance: 0.1 mm

• Maximum plated hole depth to diameter aspect ratio on a 1.6 mm thick PCB is 6:1

• Mechanical: edge chamfering, counter-sinking, counter-boring, routing, scoring all available


ELECTRICAL TEST SPECIFICATION

• Test area: 610 x 500 mm

• Number of probes: 2 front, 2 rear

• Minimum board size: 76 x 76 mm

• Maximum board thickness for clamping: 6 mm

• Repeatable accuracy: +/- 10 µm

• Resolution: 6µm

• Minimum pad pitch: 180µm

• Test voltage of resistance measurement continuity test: 0-10V

• Isolation test: 250V

• Test current of resistance measurement continuity test: 2.65µA-150mA

PCB SPECIFICATION

• Maximum active PCB size: 900 mm x 900 mm

• Materials: High Tg Fr4, Standard Tg Fr4 & Rogers, Polyimide, PTFE

• Solder resists: Liquid photo-imageable, colours: green, red, blue, black, white, silver grey

• Legend inks: all colours including white standard and yellow

• Multi-layer: layer counts from 1 to 12 layers

• PCB thicknesses from 0.2mm to 3.2 mm

• Copper weights: 1/2 oz to 3 oz, 17.5µm to 105µm

• PCB finishes: - Hot air solder level both lead-free and leaded: immersion silver or immersion gold over electroless nickel

• Min track and gap: 0.1 mm on 1/2 oz copper start, 0.15 mm on 1 oz copper start, 0.2 mm on 2 oz copper start

• Smallest drill at size: 0.2mm Smallest recommended drill size: 0.3mm

• Minimum solder resist to copper clearance: 0.1 mm

• Maximum plated hole depth to diameter aspect ratio on a 1.6 mm thick PCB is 6:1

• Mechanical: edge chamfering, counter-sinking, counter-boring, routing, scoring all available


ELECTRICAL TEST SPECIFICATION

• Test area: 610 x 500 mm

• Number of probes: 2 front, 2 rear

• Minimum board size: 76 x 76 mm

• Maximum board thickness for clamping: 6 mm

• Repeatable accuracy: +/- 10 µm

• Resolution: 6µm

• Minimum pad pitch: 180µm

• Test voltage of resistance measurement continuity test: 0-10V

• Isolation test: 250V

• Test current of resistance measurement continuity test: 2.65µA-150mA

PHOTOMECHANICAL SERVICES ESSEX LTD - CELEBRATING 50 YEARS